dmesg - Intel 0000
Linux version 5.4.0-29-generic (buildd@lgw01-amd64-035) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 (Ubuntu 5.4.0-29.33-generic 5.4.30)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000078efcfff] usable
BIOS-e820: [mem 0x0000000078efd000-0x0000000079706fff] reserved
BIOS-e820: [mem 0x0000000079707000-0x000000007983dfff] usable
BIOS-e820: [mem 0x000000007983e000-0x0000000079d1bfff] ACPI NVS
BIOS-e820: [mem 0x0000000079d1c000-0x000000007bcf6fff] reserved
BIOS-e820: [mem 0x000000007bcf7000-0x000000007bcf7fff] usable
BIOS-e820: [mem 0x000000007bcf8000-0x000000007bd7dfff] reserved
BIOS-e820: [mem 0x000000007bd7e000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x7283b018-0x7283c257] usable ==> usable
e820: update [mem 0x7283b018-0x7283c257] usable ==> usable
e820: update [mem 0x72829018-0x7283a057] usable ==> usable
e820: update [mem 0x72829018-0x7283a057] usable ==> usable
e820: update [mem 0x72817018-0x72828057] usable ==> usable
e820: update [mem 0x72817018-0x72828057] usable ==> usable
e820: update [mem 0x7280e018-0x72816057] usable ==> usable
e820: update [mem 0x7280e018-0x72816057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000007280e017] usable
reserve setup_data: [mem 0x000000007280e018-0x0000000072816057] usable
reserve setup_data: [mem 0x0000000072816058-0x0000000072817017] usable
reserve setup_data: [mem 0x0000000072817018-0x0000000072828057] usable
reserve setup_data: [mem 0x0000000072828058-0x0000000072829017] usable
reserve setup_data: [mem 0x0000000072829018-0x000000007283a057] usable
reserve setup_data: [mem 0x000000007283a058-0x000000007283b017] usable
reserve setup_data: [mem 0x000000007283b018-0x000000007283c257] usable
reserve setup_data: [mem 0x000000007283c258-0x0000000078efcfff] usable
reserve setup_data: [mem 0x0000000078efd000-0x0000000079706fff] reserved
reserve setup_data: [mem 0x0000000079707000-0x000000007983dfff] usable
reserve setup_data: [mem 0x000000007983e000-0x0000000079d1bfff] ACPI NVS
reserve setup_data: [mem 0x0000000079d1c000-0x000000007bcf6fff] reserved
reserve setup_data: [mem 0x000000007bcf7000-0x000000007bcf7fff] usable
reserve setup_data: [mem 0x000000007bcf8000-0x000000007bd7dfff] reserved
reserve setup_data: [mem 0x000000007bd7e000-0x000000007bffffff] usable
reserve setup_data: [mem 0x000000007c000000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000087fffffff] usable
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x7ba52f18 ACPI=0x7983e000 ACPI 2.0=0x7983e000 SMBIOS=0xf05e0 SMBIOS 3.0=0x7ba4f000 MPS=0xfca40
secureboot: Secure boot disabled
SMBIOS 3.0.0 present.
DMI: Supermicro Super Server/X10SRM-F, BIOS 3.0a 02/08/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.371 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 0000F9800000 mask 3FFFFF800000 write-through
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcdf0-0x000fcdff]
esrt: Reserving ESRT space from 0x000000007ba52f18 to 0x000000007ba52f50.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x53d401000, 0x53d401fff] PGTABLE
BRK [0x53d402000, 0x53d402fff] PGTABLE
BRK [0x53d403000, 0x53d403fff] PGTABLE
BRK [0x53d404000, 0x53d404fff] PGTABLE
BRK [0x53d405000, 0x53d405fff] PGTABLE
BRK [0x53d406000, 0x53d406fff] PGTABLE
BRK [0x53d407000, 0x53d407fff] PGTABLE
BRK [0x53d408000, 0x53d408fff] PGTABLE
BRK [0x53d409000, 0x53d409fff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x3d121000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007983E000 000024 (v02 SUPERM)
ACPI: XSDT 0x000000007983E0A0 0000BC (v01 01072009 AMI 00010013)
ACPI: FACP 0x000000007986FB78 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x000000007983E1F0 031984 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079D1AF80 000040
ACPI: APIC 0x000000007986FC88 0001E0 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 0x000000007986FE68 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 0x000000007986FEB0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: MCFG 0x000000007986FF50 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x000000007986FF90 000042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: HPET 0x000000007986FFD8 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: NFIT 0x0000000079870010 018028 (v01 00000000 00000000)
ACPI: WDDT 0x0000000079888038 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079888078 016F57 (v02 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x000000007989EFD0 000071 (v02 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SSDT 0x000000007989F048 00264C (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x00000000798A1698 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x00000000798A1700 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x00000000798A1808 0000C4 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 0x00000000798A18D0 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 0x00000000798A1B50 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 0x00000000798A1B80 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 0x00000000798A1DB0 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
NODE_DATA(0) allocated [mem 0x87ffd5000-0x87fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000078efcfff]
node 0: [mem 0x0000000079707000-0x000000007983dfff]
node 0: [mem 0x000000007bcf7000-0x000000007bcf7fff]
node 0: [mem 0x000000007bd7e000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
Zeroed struct page in unavailable ranges: 28074 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8360534
DMA zone: 64 pages used for memmap
DMA zone: 29 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7691 pages used for memmap
DMA32 zone: 492215 pages, LIFO batch:63
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb000020 (or later)
smpboot: Allowing 28 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7280e000-0x7280efff]
PM: Registered nosave memory: [mem 0x72816000-0x72816fff]
PM: Registered nosave memory: [mem 0x72817000-0x72817fff]
PM: Registered nosave memory: [mem 0x72828000-0x72828fff]
PM: Registered nosave memory: [mem 0x72829000-0x72829fff]
PM: Registered nosave memory: [mem 0x7283a000-0x7283afff]
PM: Registered nosave memory: [mem 0x7283b000-0x7283bfff]
PM: Registered nosave memory: [mem 0x7283c000-0x7283cfff]
PM: Registered nosave memory: [mem 0x78efd000-0x79706fff]
PM: Registered nosave memory: [mem 0x7983e000-0x79d1bfff]
PM: Registered nosave memory: [mem 0x79d1c000-0x7bcf6fff]
PM: Registered nosave memory: [mem 0x7bcf8000-0x7bd7dfff]
PM: Registered nosave memory: [mem 0x7c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:28 nr_cpu_ids:28 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 8229870
Policy zone: Normal
DMAR: IOMMU enabled
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32617416K/33442136K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 824720K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=28, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44478 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=28.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=28
NR_IRQS: 524544, nr_irqs: 1056, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007ba62000 end: 0x0000007ba71fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3986335f474, max_idle_ns: 881590718411 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.74 BogoMIPS (lpj=7981484)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
TAA: Vulnerable: Clear CPU buffers attempted, no microcode
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 2.00GHz (family: 0x6, model: 0x4f, stepping: 0x0)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27
smp: Brought up 1 node, 28 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 28 processors activated (111740.77 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7983e000-0x79d1bfff] (5103616 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 08:52:54, date: 2020-05-09
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1589014374.208:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug AER LTR]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:6fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:6feb] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:6fec] type 00 class 0x088000
pci 0000:ff:0d.5: [8086:6fed] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:6ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:6ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:6f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:6f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:6f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:6f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:6f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:6fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:6fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:6fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:6f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb52c000-0xfb52ffff 64bit]
pci 0000:00:04.1: [8086:6f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb528000-0xfb52bfff 64bit]
pci 0000:00:04.2: [8086:6f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb524000-0xfb527fff 64bit]
pci 0000:00:04.3: [8086:6f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb520000-0xfb523fff 64bit]
pci 0000:00:04.4: [8086:6f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb51c000-0xfb51ffff 64bit]
pci 0000:00:04.5: [8086:6f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb518000-0xfb51bfff 64bit]
pci 0000:00:04.6: [8086:6f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb514000-0xfb517fff 64bit]
pci 0000:00:04.7: [8086:6f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb510000-0xfb513fff 64bit]
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb539000-0xfb539fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb538000-0xfb5387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb500000-0xfb50ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb534000-0xfb5343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: Enabling MPC IRBNCE
pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb533000-0xfb5333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb532000-0xfb5327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb531000-0xfb5310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfb400000-0xfb403fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:02:00.0: [15b3:6750] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xf9800000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:02.0: bridge window [mem 0xf9800000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:1521] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb320000-0xfb33ffff]
pci 0000:04:00.0: reg 0x18: [io 0xe020-0xe03f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfb344000-0xfb347fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:04:00.1: [8086:1521] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb300000-0xfb31ffff]
pci 0000:04:00.1: reg 0x18: [io 0xe000-0xe01f]
pci 0000:04:00.1: reg 0x1c: [mem 0xfb340000-0xfb343fff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: extended config space not accessible
pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:07:00.0: BAR 0: assigned to efifb
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:07:00.0: vgaarb: setting as boot VGA device
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:07:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7280e018-0x73ffffff]
e820: reserve RAM buffer [mem 0x72817018-0x73ffffff]
e820: reserve RAM buffer [mem 0x72829018-0x73ffffff]
e820: reserve RAM buffer [mem 0x7283b018-0x73ffffff]
e820: reserve RAM buffer [mem 0x78efd000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7983e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bcf8000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:00:03.2: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:02.0: bridge window [mem 0xf9800000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:04:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:04:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:04:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:03.2: bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:01: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:02: resource 1 [mem 0xfb100000-0xfb2fffff]
pci_bus 0000:02: resource 2 [mem 0xf9800000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:04: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 28228 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 27311 usecs
pci 0000:01:00.0: CLS mismatch (64 != 32), using 64 bytes
pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 47988K
DMAR: dmar0: Using Queued invalidation
pci 0000:ff:0b.0: Adding to iommu group 0
pci 0000:ff:0b.1: Adding to iommu group 0
pci 0000:ff:0b.2: Adding to iommu group 0
pci 0000:ff:0b.3: Adding to iommu group 0
pci 0000:ff:0c.0: Adding to iommu group 1
pci 0000:ff:0c.1: Adding to iommu group 1
pci 0000:ff:0c.2: Adding to iommu group 1
pci 0000:ff:0c.3: Adding to iommu group 1
pci 0000:ff:0c.4: Adding to iommu group 1
pci 0000:ff:0c.5: Adding to iommu group 1
pci 0000:ff:0c.6: Adding to iommu group 1
pci 0000:ff:0c.7: Adding to iommu group 1
pci 0000:ff:0d.0: Adding to iommu group 2
pci 0000:ff:0d.1: Adding to iommu group 2
pci 0000:ff:0d.2: Adding to iommu group 2
pci 0000:ff:0d.3: Adding to iommu group 2
pci 0000:ff:0d.4: Adding to iommu group 2
pci 0000:ff:0d.5: Adding to iommu group 2
pci 0000:ff:0f.0: Adding to iommu group 3
pci 0000:ff:0f.1: Adding to iommu group 3
pci 0000:ff:0f.2: Adding to iommu group 3
pci 0000:ff:0f.3: Adding to iommu group 3
pci 0000:ff:0f.4: Adding to iommu group 3
pci 0000:ff:0f.5: Adding to iommu group 3
pci 0000:ff:0f.6: Adding to iommu group 3
pci 0000:ff:10.0: Adding to iommu group 4
pci 0000:ff:10.1: Adding to iommu group 4
pci 0000:ff:10.5: Adding to iommu group 4
pci 0000:ff:10.6: Adding to iommu group 4
pci 0000:ff:10.7: Adding to iommu group 4
pci 0000:ff:12.0: Adding to iommu group 5
pci 0000:ff:12.1: Adding to iommu group 5
pci 0000:ff:12.4: Adding to iommu group 5
pci 0000:ff:12.5: Adding to iommu group 5
pci 0000:ff:13.0: Adding to iommu group 6
pci 0000:ff:13.1: Adding to iommu group 6
pci 0000:ff:13.2: Adding to iommu group 6
pci 0000:ff:13.3: Adding to iommu group 6
pci 0000:ff:13.6: Adding to iommu group 6
pci 0000:ff:13.7: Adding to iommu group 6
pci 0000:ff:14.0: Adding to iommu group 7
pci 0000:ff:14.1: Adding to iommu group 7
pci 0000:ff:14.2: Adding to iommu group 7
pci 0000:ff:14.3: Adding to iommu group 7
pci 0000:ff:14.4: Adding to iommu group 7
pci 0000:ff:14.5: Adding to iommu group 7
pci 0000:ff:14.6: Adding to iommu group 7
pci 0000:ff:14.7: Adding to iommu group 7
pci 0000:ff:16.0: Adding to iommu group 8
pci 0000:ff:16.1: Adding to iommu group 8
pci 0000:ff:16.2: Adding to iommu group 8
pci 0000:ff:16.3: Adding to iommu group 8
pci 0000:ff:16.6: Adding to iommu group 8
pci 0000:ff:16.7: Adding to iommu group 8
pci 0000:ff:17.0: Adding to iommu group 9
pci 0000:ff:17.1: Adding to iommu group 9
pci 0000:ff:17.2: Adding to iommu group 9
pci 0000:ff:17.3: Adding to iommu group 9
pci 0000:ff:17.4: Adding to iommu group 9
pci 0000:ff:17.5: Adding to iommu group 9
pci 0000:ff:17.6: Adding to iommu group 9
pci 0000:ff:17.7: Adding to iommu group 9
pci 0000:ff:1e.0: Adding to iommu group 10
pci 0000:ff:1e.1: Adding to iommu group 10
pci 0000:ff:1e.2: Adding to iommu group 10
pci 0000:ff:1e.3: Adding to iommu group 10
pci 0000:ff:1e.4: Adding to iommu group 10
pci 0000:ff:1f.0: Adding to iommu group 11
pci 0000:ff:1f.2: Adding to iommu group 11
pci 0000:00:00.0: Adding to iommu group 12
pci 0000:00:01.0: Adding to iommu group 13
pci 0000:00:02.0: Adding to iommu group 14
pci 0000:00:03.0: Adding to iommu group 15
pci 0000:00:03.2: Adding to iommu group 16
pci 0000:00:04.0: Adding to iommu group 17
pci 0000:00:04.1: Adding to iommu group 17
pci 0000:00:04.2: Adding to iommu group 17
pci 0000:00:04.3: Adding to iommu group 17
pci 0000:00:04.4: Adding to iommu group 17
pci 0000:00:04.5: Adding to iommu group 17
pci 0000:00:04.6: Adding to iommu group 17
pci 0000:00:04.7: Adding to iommu group 17
pci 0000:00:05.0: Adding to iommu group 18
pci 0000:00:05.1: Adding to iommu group 18
pci 0000:00:05.2: Adding to iommu group 18
pci 0000:00:05.4: Adding to iommu group 18
pci 0000:00:11.0: Adding to iommu group 19
pci 0000:00:11.4: Adding to iommu group 19
pci 0000:00:14.0: Adding to iommu group 20
pci 0000:00:1a.0: Adding to iommu group 21
pci 0000:00:1c.0: Adding to iommu group 22
pci 0000:00:1c.2: Adding to iommu group 23
pci 0000:00:1d.0: Adding to iommu group 24
pci 0000:00:1f.0: Adding to iommu group 25
pci 0000:00:1f.2: Adding to iommu group 25
pci 0000:00:1f.3: Adding to iommu group 25
pci 0000:01:00.0: Adding to iommu group 26
pci 0000:02:00.0: Adding to iommu group 27
pci 0000:04:00.0: Adding to iommu group 28
pci 0000:04:00.1: Adding to iommu group 29
pci 0000:06:00.0: Adding to iommu group 30
pci 0000:07:00.0: Adding to iommu group 30
DMAR: Intel(R) Virtualization Technology for Directed I/O
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:02.0: PME: Signaling with IRQ 27
pcieport 0000:00:03.0: PME: Signaling with IRQ 29
pcieport 0000:00:03.2: PME: Signaling with IRQ 30
pcieport 0000:00:1c.0: PME: Signaling with IRQ 31
pcieport 0000:00:1c.2: PME: Signaling with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xfa000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb534000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb533000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-29-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-29-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
usb 1-1: new high-speed USB device number 2 using ehci-pci
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
usb 2-1: new high-speed USB device number 2 using ehci-pci
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05
intel_pstate: P-states controlled by the platform
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05
ledtrig-cpu: registered to indicate activity on CPUs
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EFI Variables Facility v0.08 2004-May-17
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
usb 3-6: new low-speed USB device number 2 using xhci_hcd
RAS: Correctable Errors collector initialized.
microcode: sig=0x406f0, pf=0x20, revision=0x14
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1857604621, 719243)->(1924337191, -66013327)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f14f50a5d0e5ac84fc1bff83a20d953027416106'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
pstore: Using crash dump compression: deflate
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
usb 3-6: New USB device found, idVendor=0e8f, idProduct=00a8, bcdDevice= 3.11
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
BERT: Error records from previous boot:
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Hardware Error]: event severity: fatal
[Hardware Error]: Error 0, type: fatal
usb 3-6: Product: 2.4G RX
[Hardware Error]: section_type: PCIe error
usb 3-6: Manufacturer: DaKai
[Hardware Error]: port_type: 4, root port
[Hardware Error]: version: 1.16
[Hardware Error]: command: 0x0010, status: 0x0400
[Hardware Error]: device_id: 0000:00:00.0
[Hardware Error]: slot: 0
[Hardware Error]: secondary_bus: 0x00
[Hardware Error]: vendor_id: 0x8086, device_id: 0x6f00
[Hardware Error]: class_code: 000600
[Hardware Error]: aer_uncor_status: 0x00000000, aer_uncor_mask: 0x00000000
[Hardware Error]: aer_uncor_severity: 0x00000000
[Hardware Error]: TLP Header: 00000000 00000000 00000000 00000000
tsc: Refined TSC clocksource calibration: 1995.379 MHz
PM: Magic number: 4:854:876
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398642b8c65, max_idle_ns: 881590773603 ns
acpi device:e9: hash matches
acpi device:bc: hash matches
clocksource: Switched to clocksource tsc
rtc_cmos 00:00: setting system clock to 2020-05-09T08:52:56 UTC (1589014376)
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 0
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 1
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 2
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 3
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 4
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 5
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 6
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 7
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 8: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 8
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 9: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 9
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 10: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 10
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 11: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 11
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 12: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 12
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 13: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 13
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 14: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 14
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 15: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 15
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 16: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 16
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 17: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 17
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 18: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 18
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 19: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 19
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 20: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 20
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 21: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 21
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 22: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 22
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 23: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 23
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 24: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 24
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 25: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 25
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 26: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 26
[Firmware Bug]: BIOS needs update for CPU frequency support
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 27: 0x0 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 27
[Firmware Bug]: BIOS needs update for CPU frequency support
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1196K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
nvme nvme0: pci function 0000:01:00.0
hidraw: raw HID events driver (C) Jiri Kosina
cryptd: max_cpu_qlen set to 1000
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
checking generic (fa000000 300000) vs hw (fa000000 1000000)
fb0: switching to astdrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Using P2A bridge for configuration
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram MCLK=396 Mhz type=1 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 16418636 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:0E8F:00A8.0001/input/input2
hid-generic 0003:0E8F:00A8.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:14.0-6/input0
input: DaKai 2.4G RX Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0E8F:00A8.0002/input/input3
input: DaKai 2.4G RX System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0E8F:00A8.0002/input/input4
fbcon: astdrmfb (fb0) is primary device
input: DaKai 2.4G RX Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0E8F:00A8.0002/input/input5
input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0E8F:00A8.0002/input/input6
hid-generic 0003:0E8F:00A8.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:14.0-6/input1
Console: switching to colour frame buffer device 160x64
ast 0000:07:00.0: fb0: astdrmfb frame buffer device
nvme nvme0: 7/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4
[drm] Initialized ast 0.1.0 20120228 for 0000:07:00.0 on minor 0
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted NFSD configuration filesystem.
ppdev: user-space parallel port driver
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting pNFS block layout mapping daemon...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Started pNFS block layout mapping daemon.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: mnt-acushome.automount: Directory /mnt/acushome to mount over is not empty, mounting anyway.
systemd[1]: Set up automount mnt-acushome.automount.
systemd[1]: Set up automount mnt-nucdata.automount.
systemd[1]: Mounting Mount unit for chromium, revision 1135...
systemd[1]: Mounting Mount unit for chromium, revision 1143...
systemd[1]: Mounting Mount unit for core, revision 8935...
systemd[1]: Mounting Mount unit for core, revision 9066...
systemd[1]: Mounting Mount unit for core18, revision 1705...
systemd[1]: Mounting Mount unit for core18, revision 1754...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 27...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1502...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for lxd, revision 14890...
systemd[1]: Mounting Mount unit for lxd, revision 14954...
systemd[1]: Mounting Mount unit for micropython, revision 75...
systemd[1]: Mounting Mount unit for micropython, revision 80...
systemd[1]: Mounting Mount unit for snap-store, revision 394...
systemd[1]: Mounting Mount unit for snap-store, revision 433...
systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
systemd[1]: Reached target Containers.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Mounted Mount unit for chromium, revision 1135.
systemd[1]: Mounted Mount unit for chromium, revision 1143.
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 5.00
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
mlx4_core: Mellanox ConnectX core driver v4.0-0
mlx4_core: Initializing 0000:02:00.0
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
systemd[1]: Started Journal Service.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
systemd-journald[631]: Received client request to flush runtime journal.
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538200 irq 50
ata4: SATA max UDMA/133 abar m2048@0xfb538000 port 0xfb538280 irq 50
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
igb 0000:04:00.0: DCA enabled
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:da:62:9e
igb 0000:04:00.0: eth0: PBA No: 010A00-000
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:04:00.1: DCA enabled
igb 0000:04:00.1: added PHC on eth1
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:da:62:9f
igb 0000:04:00.1: eth1: PBA No: 010A00-000
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532100 irq 63
ata6: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532180 irq 63
ata7: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532200 irq 63
ata8: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532280 irq 63
ata9: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532300 irq 63
ata10: SATA max UDMA/133 abar m2048@0xfb532000 port 0xfb532380 irq 63
igb 0000:04:00.1 eno2: renamed from eth1
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#1: DEV 0000:ff:12.4 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl_common: Found RAPL domain package
igb 0000:04:00.0 eno1: renamed from eth0
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: ST10000VN0004-1ZD101, SC61, max UDMA/133
ata2.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-10: ST10000VN0004-1ZD101, SC61, max UDMA/133
ata4.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ATA-10: ST10000VN0004-1ZD101, SC61, max UDMA/133
ata1.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC61 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC61 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ata3.00: ATA-10: ST10000VN0004-1ZD101, SC61, max UDMA/133
ata3.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
sd 1:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC61 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC61 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata5.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata5.00: supports DRM functions and may not be fully accessible
Adding 19468284k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:19468284k SSFS
ata5.00: disabling queued TRIM support
ata10: SATA link down (SStatus 0 SControl 300)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: supports DRM functions and may not be fully accessible
ata8.00: disabling queued TRIM support
ata8.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata8.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata8.00: disabling queued TRIM support
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata6.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata8.00: configured for UDMA/133
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg6 type 0
sd 7:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] supports TCG Opal
sd 4:0:0:0: [sde] Attached SCSI disk
sdb: sdb1
sda: sda1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sdf: sdf1
sd 5:0:0:0: [sdf] supports TCG Opal
sd 5:0:0:0: [sdf] Attached SCSI disk
sdg: sdg1
sdc: sdc1
sd 7:0:0:0: [sdg] supports TCG Opal
sd 7:0:0:0: [sdg] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
md127: detected capacity change from 0 to 6000784441344
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: data=ordered
md/raid10:md126: active with 4 out of 4 devices
md126: detected capacity change from 0 to 20001391116288
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1589014381.756:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1269 comm="apparmor_parser"
audit: type=1400 audit(1589014381.756:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1280 comm="apparmor_parser"
audit: type=1400 audit(1589014381.756:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1276 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1281 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1277 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1277 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1278 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1278 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1278 comm="apparmor_parser"
audit: type=1400 audit(1589014381.760:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1271 comm="apparmor_parser"
pmd_set_huge: Cannot satisfy [mem 0xf9c00000-0xf9e00000] with a huge-page mapping due to MTRR override.
mlx4_core 0000:02:00.0: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link)
mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
mlx4_en 0000:02:00.0: Activating port:1
mlx4_en: 0000:02:00.0: Port 1: enabling only PFC DCB ops
mlx4_en: 0000:02:00.0: Port 1: Using 28 TX rings
mlx4_en: 0000:02:00.0: Port 1: Using 16 RX rings
mlx4_en: 0000:02:00.0: Port 1: Initializing port
mlx4_en 0000:02:00.0: Activating port:2
mlx4_en: 0000:02:00.0: Port 2: enabling only PFC DCB ops
mlx4_en: 0000:02:00.0: Port 2: Using 28 TX rings
mlx4_en: 0000:02:00.0: Port 2: Using 16 RX rings
mlx4_en: 0000:02:00.0: Port 2: Initializing port
mlx4_core 0000:02:00.0 ens6d1: renamed from eth1
mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
mlx4_ib_add: counter index 2 for port 1 allocated 1
mlx4_ib_add: counter index 3 for port 2 allocated 1
new mount options do not match the existing superblock, will be ignored
mlx4_en: eth0: Steering Mode 1
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: Using legacy client tracking operations.
NFSD: starting 90-second grace period (net f00000a0)
IPMI message handler: version 39.2
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si: Unable to find any System Interface(s)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
bpfilter: Loaded bpfilter_umh pid 1759
Started bpfilter
mlx4_en: eth0: Link Up
mlx4_en: ens6d1: Link Up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
virbr2: port 1(virbr2-nic) entered blocking state
virbr2: port 1(virbr2-nic) entered disabled state
device virbr2-nic entered promiscuous mode
virbr2: port 1(virbr2-nic) entered blocking state
virbr2: port 1(virbr2-nic) entered listening state
virbr2: port 1(virbr2-nic) entered disabled state
igb 0000:04:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
aufs 5.4.3-20200302
Bridge firewalling registered
Initializing XFRM netlink socket
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS: Attempting to mount //nuc.lan/nucdata
CIFS: Attempting to mount //acus.lan10/zh
L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and for details.
CIFS VFS: Close unmatched open
CIFS VFS: Close unmatched open
CIFS VFS: Close unmatched open
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
CIFS: Attempting to mount //nuc.lan/nucdata
CIFS: Attempting to mount //nuc.lan/nucdata
kauditd_printk_skb: 57 callbacks suppressed
audit: type=1400 audit(1589061610.348:69): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=510922 comm="cups-browsed" capability=23 capname="sys_nice"
perf: interrupt took too long (3147 > 3130), lowering kernel.perf_event_max_sample_rate to 63500
CIFS: Attempting to mount //nuc.lan/nucdata
CIFS VFS: cifs_mount failed w/return code = -2
CIFS: Attempting to mount //nuc.lan/nucdata
CIFS VFS: cifs_mount failed w/return code = -2
CIFS: Attempting to mount //nuc.lan/nucdata
perf: interrupt took too long (3956 > 3933), lowering kernel.perf_event_max_sample_rate to 50500
audit: type=1400 audit(1589148005.027:70): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1384405 comm="cups-browsed" capability=23 capname="sys_nice"
perf: interrupt took too long (4952 > 4945), lowering kernel.perf_event_max_sample_rate to 40250
EXT4-fs (loop16p1): mounted filesystem with writeback data mode. Opts: (null)
EXT4-fs (loop16p1): mounted filesystem with writeback data mode. Opts: (null)
EXT4-fs (loop16p1): mounted filesystem with writeback data mode. Opts: (null)
audit: type=1400 audit(1589234407.793:71): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=3129288 comm="cups-browsed" capability=23 capname="sys_nice"
EXT4-fs (loop16p1): mounted filesystem with writeback data mode. Opts: (null)
EXT4-fs (loop16p1): mounted filesystem with writeback data mode. Opts: (null)
EXT4-fs (loop16p1): mounted filesystem with writeback data mode. Opts: (null)
docker0: port 1(vethaf63025) entered blocking state
docker0: port 1(vethaf63025) entered disabled state
device vethaf63025 entered promiscuous mode
eth0: renamed from veth21cf72e
IPv6: ADDRCONF(NETDEV_CHANGE): vethaf63025: link becomes ready
docker0: port 1(vethaf63025) entered blocking state
docker0: port 1(vethaf63025) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
veth21cf72e: renamed from eth0
docker0: port 1(vethaf63025) entered disabled state
docker0: port 1(vethaf63025) entered disabled state
device vethaf63025 left promiscuous mode
docker0: port 1(vethaf63025) entered disabled state
docker0: port 1(vethf0a8cc3) entered blocking state
docker0: port 1(vethf0a8cc3) entered disabled state
device vethf0a8cc3 entered promiscuous mode
eth0: renamed from veth4998de0
IPv6: ADDRCONF(NETDEV_CHANGE): vethf0a8cc3: link becomes ready
docker0: port 1(vethf0a8cc3) entered blocking state
docker0: port 1(vethf0a8cc3) entered forwarding state
docker0: port 1(vethf0a8cc3) entered disabled state
veth4998de0: renamed from eth0
docker0: port 1(vethf0a8cc3) entered disabled state
device vethf0a8cc3 left promiscuous mode
docker0: port 1(vethf0a8cc3) entered disabled state